Friday, May 8, 2020 10:00 AM
DALLAS, TX / ACCESSWIRE / May 8, 2020 / The technologies in automotive lighting have undergone significant change in recent years, with xenon headlamp to LED and laser Pixel Lighting solutions. The rising wave of new technologies, such as laser, µAFS LED, flexible OLED are creating significant potential for automotive lighting in various vehicles to enable the driver visibility at longer range and provides safety to other drivers and pedestrians.
In automotive lighting market, various technologies, such as halogen, xenon, LED and laser technologies are used for the interior and exterior lighting solutions. Increase in demand for premium segment vehicles, lighting regulations for better visibility and safety, and high demand for adaptive lighting are creating opportunities for various automotive lighting technologies.
To download free PDF brochure please go to https://www.lucintel.com/technology-automotive-lighting-market.aspx
Lucintel study finds that automotive lighting technology is forecast to grow at a CAGR of 3% from 2019 to 2024. LED lighting technology is the largest segment of this market and is growing at above average growth. Hella, Philips, Osram Licht, Valeo, Zizala, Robert Bosch, and Zkw are among the major players in the automotive lighting market.
Lucintel, a leading global management consulting and market research firm with over 1,000 clients worldwide, has analyzed the technologies used in automotive lighting market, and it has now published a comprehensive research report titled “Technology Landscape, Trends and Opportunities in the Global Automotive Lighting Market 2019-2024″. This report analyzes technology maturity, degree of disruption, competitive intensity, market potential and other parameters of various technologies in automotive lighting market.
The Lucintel report serves as a catalyst for growth as it provides a comprehensive data and analysis on trends, key drivers, and directions. The study includes technology readiness, competitive intensity, regulatory compliance, disruption potential, trends, forecasts and strategic implications for the global automotive lighting technology by application, technology, and region as follows:
Technology Readiness by Technology Type
Competitive Intensity and Regulatory Compliance
Disruption Potential by Technology Type
Trends and Forecasts by Technology Type [$M shipment analysis from 2013 to 2024]:
- Other Technologies
Technology Trends and Forecasts by Application [$M shipment analysis from 2013 to 2024]:
- Interior Lighting
- Other Technologies
- Exterior Lighting
- Other Technologies
Technology Trends and Forecasts by Region [$M shipment analysis for 2013 to 2024]:
- United States
- United Kingdom
- South Korea
Latest Developments and Innovations in the Automotive Lighting Technologies
Companies / Ecosystems
Strategic Opportunities by Technology Type
This more than 150-pages research report will enable you to make confident business decisions in this globally competitive marketplace. For a detailed table of contents, contact Lucintel at +1-972-636-5056 or click on this link [email protected].
Lucintel, the premier global management consulting and market research firm, creates winning strategies
Bicycle Lighting Systems
Update: 3 November 2010
New MR16 Dynamo LED Page
Suggestions, Questions, Incorrect or Missing Links, Complaints, Compliments?
E-mail to Webmaster
This is a Non-Commercial Site
To easily find this
site in the future, please bookmark it. You can also
“Bicycle Lighting” and this site will usually be the first non-sponsored
This web site details how to
construct a high performance bicycle lighting system
Also contains information on
bells, horns, dynamo powered lights, and other safety devices
Location Makes a Difference
Table of Contents
“For commuters, the best front light is the very bright rechargeable lamp.”
Ken Kifer, Ken
Kifer’s Bike Pages
Ken Kifer was killed, while riding
his bicycle, by a drunk driver, on September 14, 2003. His wisdom about cycling
“With vastly more light available, night bicycling is qualitatively far safer. The road can
both further ahead and, even more important, far more brightly to the sides of the bicycle.”
Marty Goodman, Writing about the CatEye’s Stadium Bicycle Light,
in History of Electric Lighting Technology
Not everyone can afford to buy a commercially
manufactured, very bright rechargeable lighting system, which Ken Kifer
accurately describes as the best light for commuters. While prices have come
down, a rechargeable lighting system is still over $100 when you add in a
good tail light.
describes how to build a high performance, rechargeable.
lighting system without spending a lot of money. You can spend as little as $40
to construct a system, complete with a sealed beam headlamp, xenon strobe tail
light, rechargeable battery, and charger.
All components are available from retail or
mail-order stores. I don’t sell anything, this is purely an informational site.
This site contains my informed opinions, as well as the views of other groups
and individuals. There are many different solutions for bicycle lighting that
meet the criteria of “seeing and being seen,” and there are many solutions that
do not meet these criteria. Choose wisely and use common sense.
You don’t have to spend hundreds of dollars for
an adequate lighting system. A lighting system is not rocket science, it’s
basically connecting a battery to some lamps, through some switches. The challenge is in sourcing the
proper components and mounting them to the bicycle in a secure and reliable
HID bicycle lights, which cost at least $400 for a
commercial system, are now also available to cyclists wanting to build their own
systems, with all-in-one (internal ballast)
13W HID headlights available for $115. Yeah, that’s expensive, but it’s
Laid before Parliament
11th October 1989
Coming into force
1st November 1989
The Secretary of State for Transport, in exercise of the powers conferred by–
section 81 of the Road Traffic Act 1988(), in so far as these Regulations revoke enactments having effect as if they had been made under that section;
section 41 as read with section 43 of that Act as regards all other provisions of these Regulations,
and all other enabling powers, and after consultation with representative organisations in accordance with section 195 of that Act, hereby makes the following Regulations:–
Commencement, citation and revocations
1.—(1) These Regulations may be cited as the Road Vehicles Lighting Regulations 1989 and shall come into force on 1st November 1989.
(2) The Road Vehicles Lighting Regulations 1984() and the Road Vehicles Lighting (Amendment) Regulations 1987() are hereby revoked.
Statement under section 43(3) of the Road Traffic Act 1988
2.—(1) The Secretary of State is satisfied that–
(a)it is requisite that the provisions mentioned in paragraph (2) which vary the requirements about the construction of the vehicles to which those provisions apply, shall apply as from 1st November 1989 to such of those vehicles as are registered under the Vehicles (Excise) Act 1971() before the expiration of one year from the making of these Regulations; and
(b)notwithstanding that these provisions will then apply to those vehicles, no undue hardship or inconvenience will be caused thereby.
(2) The provisions referred to in paragraph (1) are those set out in the Table below–
|Number of regulation or Schedule
||Nature of requirements
||Interpretation of requirements in relation to British Standard marks.
|Schedule 1 Table V
||Invalid carriages with a maximum speed exceeding 4 mph to be fitted with direction indicators and hazard warning signal devices.
|Schedule 4 Part I paragraph 4
||The aim of dipped-beam headlamps
3.—(1) Unless the context otherwise requires, any reference in these Regulations–
(a)to a numbered regulation or Schedule is a reference to the regulation or Schedule bearing that number in these Regulations.
(b)to a numbered paragraph is to the paragraph bearing that number in the regulation or Schedule in which the reference occurs, and
(c)to a numbered or lettered sub-paragraph is to the sub-paragraph bearing that number in the paragraph in which the reference occurs.
(2) In these Regulations, unless the context otherwise requires, any expressions for which there is an entry in column 1 of the Table has the meaning given against it in column 2 or is to be construed in accordance with directions given against it in that column.
||The Road Traffic Act 1988.
|“The Construction and Use Regulations”
||The Road Vehicles (Construction and Use) Regulations 1986()
|“The Designation of Approval Marks Regulations”
||The Motor Vehicles (Designation of Approval Marks) Regulations 1979()
||A vehicle constructed or adapted for agriculture, grass cutting, forestry, |
It’s hard to believe but at one time automotive lighting was a strictly utilitarian function, with small, mostly round lights that barely allowed you to see and be seen in the darkness. In contrast, today’s car lights are at the convergence of high-tech illumination and cutting edge automotive design. Both factory and aftermarket headlights and tail lights contain the latest in brilliant lighting technology like projector beams, LEDs, and fiber optics, and these lights are integrated into the body shape in ways so distinctive that in many cases lights have become a part of a vehicle’s identity. Meanwhile, the color and brightness of interior and dash lighting in modern vehicles can be varied in ways that truly create a custom ambiance in the cockpit.
Take a moment to peruse the array of automotive lighting products we have on offer and you’ll quickly see that we’re abreast of all the latest advancements in illumination. Whether you just want replacement auto light bulbs or replacement tail lights, or want to upgrade to bright LED bulbs and custom light fixtures, we have what you’re looking for. In addition we offer many ways in which you can augment your vehicle’s lighting to increase illumination and add custom style, including Daytime Running Lights (DRLs), fog lights, “angel eyes” halo lights, off-road lights and light bars, LED light grilles, and custom LED car lights for tailgates, wheel wells, hood scoops, mirrors, and under the car.
Bright car headlights and tail lights are necessary for driving safety, but age, abrasion from airborne debris, impacts and UV rays can take their toll, leaving them dim and damaged. Our replacement car headlights and tail lights meet all DOT and Federal Motor Vehicle Safety Standards and are identical to original equipment in every respect except for price. But instead of just replacing those lights, why not use the opportunity to upgrade your vehicle’s illumination and appearance. We have projector beam, Euro, Halo, U-Bar and LED headlights in styles never imagined by the factory and fiber optic, Euro, black and LED tail lights and 3rd brake lights that will make your car or truck more conspicuous.
Installing additional lights is another way to make your vehicle more visible and be able to see better in darkness and inclement weather. DRLs have been proven to make vehicles more conspicuous, reducing collisions, and fog lights reduce glare and help you see the road ahead when driving in dense fog. But there may be no other place where increased illumination and visibility is more important than out on the trail. Our halogen, xenon and LED off-road lights come in a range of beam patterns including driving beams, spot beams, and flood beams so you put light exactly where it’s needed and avoid tree stumps, boulders, and other obstacles.
But you don’t have to buy an entire light fixture to upgrade your lighting. In addition to our stock of standard replacement car light bulbs for every type of light including
Give your customers the latest in automotive lighting innovation. Philips Automotive offers an exceptional lighting program for WDs that provides a one-stop source for both commercial and retail packaged lighting products as well as point of sale tools to help service locations and retailers capture more sales for lighting products.
The Philips Commercial Lighting portfolio includes a complete offering of standard OE replacement lighting including a full range of headlight bulbs, halogen and incandescent sealed beam headlamps, and miniature bulbs for both interior and exterior vehicle applications.
Drive customer decisions with our attractive marketing materials. Philips backs up the lighting portfolio with point of sale tools that include commercial cabinets and headlight upgrade cabinets that installers can use to stock and sell standard replacement and upgrade lighting to their DIFM customers. We offer tools such as leaflets and countermats that explain the benefits and show the complete offerings of Philips innovative, Original Equipment quality lighting products. We also offer counter displays, accompanied by a high-quality application guide to better serve your customers and guide them in their selection of our lighting products.
Source Article …